Tell someone you know about this product. In this state, the brake fluid is almost anhydrous (substance containing no water). Motorcraft High Performance DOT 3 Break Fluid conforms to FMVSS No.116 and meets SAE J1703. KEEP CONTAINER CLEAN AND TIGHTLY CLOSED TO PREVENT ABSORPTION OF MOSITURE.ĬAUTION: DO NOT REFILL CONTAINER, AND DO NOT USE FOR OTHER LIQUIDS. SAE J 1703, ISO 4925 (Class 3), FMVSS 116 DOT 3. non-mineral base oils for use in hydraulic automotive brake systems. 116 DOT 4, DOT 3, SAE J 1703 and ISO 4925 specifications. The specific formulation of RAVENOL DOT 4 LV meets current international specifications US FMVSS 116 DOT 3, DOT 4, SAE J 1703, SAE J 1704 and. There is a chemical stability and it is provided with additives which save the best lubrication efficiency. STORE BRAKE FLUID ONLY IN ITS ORIGINAL CONTAINER. it complies with the US Federal Motor Vehicle Services Specification (FMVSS). RAVENOL DOT 4 is a brake fluid for the use in all vehicles with optimum ABS characteristics.
After skin contact, wash immediately with soap and. Avoid fluid contact with brake lining or painted surfaces.įOLLOW VEHICLE MANUFACTURER'S RECOMMENDATIONS WHEN ADDING BRAKE FLUID. Shell Brake and Clutch Fluid DOT 3 is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of personal hygiene are maintained. Use keywords to find the accessory you are looking for.Įxceeds FMVSS No.116 (284 degrees F minimum wet boiling point), SAE J-1703 specifications.ĭirections: Refer to the appropriate Service Manual before adding or replacing brake fluid.
Home » Catalog » Honda Maintenance Parts » 08798-9008